Pride Mobility Go Chair Power Wheelchair
It's number one for portability! The Go Chair offers feather-touch disassembly, so you can easily transport and store this power chair.
- 300-lb. weight capacity
- Convenient under seat storage
- Feather-touch disassembly allows for easy disassembling into five pieces
- Choose from six colors
- The heaviest piece is only 36 lbs.
- 18" x 17", 5-point swivel seat with latch release
- Drive at speeds up to 3.7 mph
- 18-amp batteries
- Compact turning radius of 25.4 inches
- Height and width adjustable armrests and a large footplate
- 60" lap belt
| Model |
Go Chair
|
| Weight Capacity | 300 lbs. |
| Turning Radius1 | 25.5" |
| Width1 | 22.5" |
| Length1,2 | 28.5" without front rigging 33" with front rigging |
| Maximum Speed3 | up to 3.7 mph |
| Ground Clearance1 | 1.8" at motor, 1.7" at anti-tip, 2.7" at foot bracket |
| Front Wheels | 6" solid casters |
| Drive Wheels | 9" solid |
| Rear Wheels | 3" solid anti-tips |
| Standard Electronics | 40 amp, PG GC3 (non-programmable) |
| Battery Size (2 required) | 18 Ah, 12 V, deep-cycle |
| Standard Battery Charger | Off-board, 2 amp |
| Per-Charge Range3,6 | Up to 8.7 miles (std), 10.9 miles with extended range |
| Battery Weight5 | 14 lbs. each |
| Weight of Heaviest Piece4 | 36 lbs. (rear) |
| Standard Seat Weight | 30 lbs. |
| Standard Seat Size | Compact, Foldable (18"x17") |
| Medicare Code Coverage | K0899 Power Mobility Device, not coded by DME PDAC or does not meet criteria |
| Warranty | 5-year limited on frame; 13-month limited on electronics; 13-month limited on drive motors |
|
Notes: 1Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections. 2Without front riggings. 3Varies with user weight, terrain, battery type, battery condition and tire pressure. 4Does not include seat or battery weights. 5Battery weight may vary based on manufacturer. 6Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%. |
|
